Quick Response 2.5MPA Water Pressure Hydro Test Pumps Factory Price For Sale
Description
This kind of pressure test pump has the advantages of simple structure, easy operation and maintainance. The pump body and water outlet part are all made of copper parts, which are not easy to rust and have good corrosion resistance. It is suitable for working sites in various harsh environments. It is a necessary tool for pipeline construction.
Specification
| Photo | Model | Pressure | Flow volume | G.W/N.W | Water tank volume | Meas | Note |
| | SD-25E | 0-2.5MPA | 13ML | 5.0/4.5KG | 12L | 32*20*26cm | Steel plate thickness 2mm | Plastic box |
| SD-40E | 0-4.0MPA | 13ML | 5.0/4.5KG | 12L | 32*20*26cm | Steel plate thickness 2mm | Plastic box |
| SD-50E | 0-5.0MPA | 13ML | 5.0/4.5KG | 12L | 32*20*26cm | Steel plate thickness 2mm | Plastic box |
| | SD-100A | 0-10MPA | 13ML | 5.0/4.5KG | 12L | 32*20*26cm | Steel plate thickness 2mm | iron box |
| SD-100E | 0-10MPA | 13ML | 5.0/4.5KG | 12L | 32*20*26cm | Steel plate thickness 2mm | Plastic box |
You see our price is base on above black bold one, for other size, if you want know price, pls feel free to contact us, tks.
Advantages:
1. Hydraulic testing for leaks in heating and oil installations, air-conditioning, splinker and systems.
2. Completed with high pressure hose and connectors.
3. Pump plunger can be lubricated and has replaceable seals.
4. Efficient running needle valves ensure continuous operation.
5. Testing and Pressure range: 0-50 bar.
6. Testing equipment hydro test pump
| Trouble | Possible Cause | Method |
| 1) No water sucked. | a) Insufficient tightening torque for suction hose or gasket missing
b) Suction/delivery valves sticking
c) Pressure applied to cylinder inside owing to idle running.
d) Dust stuck to strainer | a) Fit packing and tighten suction hose.
b) Follow the instructions of caution sticker on motor.
c) Disconnect the high pressure hose and purge extra air. Wait water outflow through delivery nipple.
d) Wsah the strainer in clean water or |
| 2) No pressure rise low jet pressure | a) Pressure control valve malfunction.
b) No water flows back through overflow hose.
c) Nozzle hole clogged with dust. | a) Overhaul and inspect. Replace valve and valve seat if damaged.
b) Replace nozzle tip because nozzle hole is eroded abnormally
c) Remove dusst. |
| 3) Pressure fluctuates.(Suction hose,high pressure hose,etc, vibrate severely.) | a) Air sucked.
b) Valve or valve seat damaged or choked up with dust.
c) Regulating valve and valve seat choked up with dust or damaged. | a) Rc-fasten suction hose tight.(Check it for with or without gasket.)
b) Inspect and clean suction and delivery valves or replace them.
c) Clean or replace them. |
| 4) Pressure drop on midway and rise fail.Hose vibration. | a) No water sucked.(Dust stuck to strainer.)
b) Pressure control valve malfunction. | a) Clean strainer.
b) Disasemble and clean. |
| 5) Motor fails to start. | a) Improper wiring connection
b) Pilot lamp fails to light.
c) Defective connector.
d) Too high pressure. | a) Cleck wiring connection to switch, power outlet, etc.
b) Check connections and electric bulb.
c) Replace connector.
d) Loosen adjusting screw. |
Packing& packing:
Small Electric hydraulic test pump (hereinafter referred to as pump) is for all kinds of pressure vessels, pipelines, valves, boilers,cylinders, pressure vessels, steam boilers, fire equipment as laboratory hydraulic test and laboratory for obtaining high-pressure liquid equipment. Pressure test products and supporting pressure test, test engineering.
In order to ensure that the goods can reach you safely,we'll use Supply standard export packing,wooden packing or according customer request packing. Shipping by sea, by air, UPS, DHL, TNT, EMS, Fedx and other ways or according customer request way send goods for customer.
Instruction for use of Manual test pump
1. Before use, fill the water tank with medium (it is forbidden to use unclean medium containing sediment and other debris), and tighten the pressure switch.
2. Pull the handle, the plunger does not block in the movement, so that the medium flows out from the working nozzle, and then connect the nozzle to the tested container, so that the tested container is full of medium, and it can be used.
3. It is forbidden to carry out the test exceeding the rated pressure specified by the pump.
4. The force should be stable and not knocked.
What is Hydrotest pump?
Hydro test pumps are common procedure used to check fluid pressure vessel, such as, cylinders, boiler, tubes pipe, valves, castings, components etc.. Hydro testing is also a common testing procedure to verify pressure vessels do not leak or have manufacturing flaws.
How does a hydrostatic test pump work?
Hydrostatic testing is done to see if pipes have any leakage. The way it works is by first pumping water into a closed pipeline. Once the system is shut and locked you can test for any leakage in the pipeline. Many pumps are Honda powered and have been pre-tested and serviced to make sure they are ready to be used.
FAQ:
Q: Is sample available and free?
A: Sample is available, and price can be same as FOB price, however, delivery fee is NOT included.
Q: What's your warranty ?
A: Warranty for pump body is 6 month, motor is 1 year.
Q: How long is your delivery time?
A: Generally it is 5-10 days if the goods are in stock.
Q: How about the use of maintenance technology and equipment?
A: We have free test-bed and maintenance and training services for various pressure testing pumps.
Q: Why should I choose your product?
A: We can provide you the best quality and the most competitive price, and we have our own engineer, if you have any requirements
You can contact us directly.
Product Tags:
|
|
2.5MPA Water Pressure Hydro Test Pumps Quick Response Images
|
